Passer aux informations produits
1 de 8

kamisoriharnisch

Shohonyama Suita・Pierre de finition naturelle・Awasedo・Kyoto, Japon #107

Shohonyama Suita・Pierre de finition naturelle・Awasedo・Kyoto, Japon #107

Prix habituel €550,00 EUR
Prix habituel Prix promotionnel €550,00 EUR
Promotion Épuisé
Taxes incluses. Frais d'expédition calculés à l'étape de paiement.

Stock bas

Suita, marquée 正本山合砥・shōhonyama awasedo — pierre naturelle authentique de Kyoto — sous le cartouche des pierres naturelles de Kyoto.

La face est gris-bleu, parcourue sur toute sa largeur de denses veines de fer orange et ocre, traversée dans son tiers inférieur par une bande diagonale. La couche suita est prisée pour la manière dont sa structure porte la boue et laisse courir la lame.

4,5 sur 5 sur notre échelle de dureté, grain d’environ 8000. Dure pour une suita : elle reste franche sous la pression et finit lumineux plutôt que doux.

Une pierre d’établi de 22 cm, confortable pour les kamisori, les rasoirs droits et les couteaux en acier au carbone.

Vous recevrez exactement la pierre présentée.

Description complète

This suita comes from the Kyoto beds and is stamped 正本山合砥・shōhonyama awasedo, the mark that certifies genuine Kyoto natural stone, under the Kyoto natural-stone cartouche. The face is blue-grey, laced across its full width with dense orange and ochre iron staining and crossed by a diagonal band in the lower third. Suita is the layer valued for the way its structure carries slurry and lets the blade run, and this one is hard for its type: at 4,5 of 5 on our hardness scale with an estimated grit of 8000 it stays crisp under pressure and finishes bright rather than soft. At 22 cm it is a comfortable bench stone for kamisori, straight razors and carbon steel kitchen knives. You will receive the exact stone shown.

Matériaux

Natural Whetstone - Shohonyama Suita

Des mesures

Length: 22,0 cm
Width: 8,0 cm
Height: 2,4 cm
Weight: 1049 g
Hardness: ● ● ● ● ◐ (4,5/5) hard

Guide d'entretien

Sharpening Care Guide — Natural Japanese Whetstones

To preserve the character, performance, and longevity of your natural Japanese whetstone, please follow these care guidelines:

1. Keep the Stone Flat

Natural stones wear more slowly than synthetic stones, but regular flattening is still essential for controlled sharpening. Use a diamond lapping plate or a suitable flattening stone to maintain a flat, even surface. Avoid aggressive lapping unless necessary.

2. Use Water Only

Natural Japanese whetstones are designed to be used with water. Lightly wet the surface before use. Some stones benefit from a brief pre-wetting, while others should not be soaked for extended periods. Do not use oil or chemical additives.

3. Slurry Management

Depending on the stone, slurry may develop naturally during use. This is part of the sharpening process and should be managed gently. Avoid excessive pressure or artificial slurry generation unless intentionally desired.

4. Clean After Use

After sharpening, rinse the stone thoroughly with clean water to remove metal particles and residue. Use a soft brush if needed. Do not use soap, detergents, or abrasive cleaners.

5. Dry Slowly and Naturally

Allow the stone to air dry completely in a shaded, well-ventilated area. Avoid direct sunlight, heaters, or rapid temperature changes, as natural stones can crack if dried too quickly.

6. Store with Care

Store the stone in a dry, stable environment. Avoid damp locations and protect the stone from impacts or sudden temperature changes. If stored long-term, ensure the stone is fully dry before placing it in a box or wrapping.

7. Inspect Before Use

Before each use, rinse the surface and ensure it is free from dust, grit, or foreign particles. Any contamination may cause scratches on the blade and compromise sharpening results.

By following these guidelines, your natural whetstone will retain its unique sharpening characteristics and provide consistent, controlled results over time.

Afficher tous les détails