kamisoriharnisch
Shohonyama Suita・Natürlicher Finishing-Stein・Awasedo・Kyoto, Japan #107
Shohonyama Suita・Natürlicher Finishing-Stein・Awasedo・Kyoto, Japan #107
Niedriger Lagerbestand
Verfügbarkeit für Abholungen konnte nicht geladen werden
Suita, gestempelt 正本山合砥・shōhonyama awasedo — echter Kyotoer Naturstein — unter der Kyotoer Naturstein-Kartusche.
Die Fläche ist blaugrau, über die volle Breite von dichten orangen und ockerfarbenen Eisenadern durchzogen und im unteren Drittel von einem diagonalen Band gekreuzt. Suita ist die Schicht, die dafür geschätzt wird, wie ihre Struktur den Schlamm trägt und die Klinge laufen lässt.
4,5 von 5 auf unserer Härteskala, etwa 8000er Körnung. Hart für einen Suita: er bleibt unter Druck präzise und finisht hell statt weich.
Ein Bankstein mit 22 cm, angenehm für Kamisori, Rasiermesser und Kohlenstoffstahl-Messer.
Sie erhalten genau den abgebildeten Stein.
Gesamte Beschreibung
Gesamte Beschreibung
This suita comes from the Kyoto beds and is stamped 正本山合砥・shōhonyama awasedo, the mark that certifies genuine Kyoto natural stone, under the Kyoto natural-stone cartouche. The face is blue-grey, laced across its full width with dense orange and ochre iron staining and crossed by a diagonal band in the lower third. Suita is the layer valued for the way its structure carries slurry and lets the blade run, and this one is hard for its type: at 4,5 of 5 on our hardness scale with an estimated grit of 8000 it stays crisp under pressure and finishes bright rather than soft. At 22 cm it is a comfortable bench stone for kamisori, straight razors and carbon steel kitchen knives. You will receive the exact stone shown.
Materialien
Materialien
Natural Whetstone - Shohonyama Suita
Abmessungen
Abmessungen
Length: 22,0 cm
Width: 8,0 cm
Height: 2,4 cm
Weight: 1049 g
Hardness: ● ● ● ● ◐ (4,5/5) hard
Pflegeratgeber
Pflegeratgeber
Sharpening Care Guide — Natural Japanese Whetstones
To preserve the character, performance, and longevity of your natural Japanese whetstone, please follow these care guidelines:
1. Keep the Stone Flat
Natural stones wear more slowly than synthetic stones, but regular flattening is still essential for controlled sharpening. Use a diamond lapping plate or a suitable flattening stone to maintain a flat, even surface. Avoid aggressive lapping unless necessary.
2. Use Water Only
Natural Japanese whetstones are designed to be used with water. Lightly wet the surface before use. Some stones benefit from a brief pre-wetting, while others should not be soaked for extended periods. Do not use oil or chemical additives.
3. Slurry Management
Depending on the stone, slurry may develop naturally during use. This is part of the sharpening process and should be managed gently. Avoid excessive pressure or artificial slurry generation unless intentionally desired.
4. Clean After Use
After sharpening, rinse the stone thoroughly with clean water to remove metal particles and residue. Use a soft brush if needed. Do not use soap, detergents, or abrasive cleaners.
5. Dry Slowly and Naturally
Allow the stone to air dry completely in a shaded, well-ventilated area. Avoid direct sunlight, heaters, or rapid temperature changes, as natural stones can crack if dried too quickly.
6. Store with Care
Store the stone in a dry, stable environment. Avoid damp locations and protect the stone from impacts or sudden temperature changes. If stored long-term, ensure the stone is fully dry before placing it in a box or wrapping.
7. Inspect Before Use
Before each use, rinse the surface and ensure it is free from dust, grit, or foreign particles. Any contamination may cause scratches on the blade and compromise sharpening results.
By following these guidelines, your natural whetstone will retain its unique sharpening characteristics and provide consistent, controlled results over time.
Teilen
