kamisoriharnisch
Shobudani Namazu・Natürlicher Finishing-Stein・Awasedo・Kyoto, Japan #103
Shobudani Namazu・Natürlicher Finishing-Stein・Awasedo・Kyoto, Japan #103
Niedriger Lagerbestand
Verfügbarkeit für Abholungen konnte nicht geladen werden
Shobudani aus Kyoto, gestempelt 菖蒲産 — aus Shōbu — unter der Kyotoer Naturstein-Marke.
Die Fläche ist ein blasser cremefarbener Korpus mit Namazu, den Welszeichnungen, für die dieses Tal bekannt ist, dazu blaugraue Partien und feine rosa Linien. Die Rückseite ist stark ocker- und eisenfleckig, eine Kante ist mit rotem Urushi versiegelt.
3,5 von 5 auf unserer Härteskala, etwa 8000er Körnung. Shobudani läuft weicher und nachsichtiger als die härteren Kyotoer Schichten und gibt bereitwillig Schlamm ab — ein geduldiger Finisher für Kamisori und Rasiermesser.
Mit passendem Tomo-Nagura geliefert, gestempelt 菖蒲谷産 — Schlamm aus demselben Tal, die traditionelle Art, diesen Stein zu arbeiten.
Sie erhalten genau den abgebildeten Stein.
Gesamte Beschreibung
Gesamte Beschreibung
This Shobudani natural finishing stone comes from the Shōbu valley in Kyoto, stamped 菖蒲産 under the Kyoto natural-stone mark. It carries namazu, the catfish markings the valley is known for, over a pale cream body. At 3,5 of 5 on our hardness scale it sits below the harder Kyoto layers: it releases slurry readily, cuts with a soft and forgiving feel, and finishes with a quiet kasumi rather than a bright mirror. That combination makes it a patient finisher for kamisori and straight razors, and a pleasant stone for single-bevel and carbon kitchen knives. It is supplied with its matching tomo-nagura from the same valley. You will receive the exact stone shown.
Materialien
Materialien
Natural Whetstone - Shobudani
Abmessungen
Abmessungen
Length: 15,0 cm
Width: 7,0 cm
Height: 2,5 cm
Weight: 711 g
Hardness: ● ● ● ◐ ○ (3,5/5) hard
Pflegeratgeber
Pflegeratgeber
Sharpening Care Guide — Natural Japanese Whetstones
To preserve the character, performance, and longevity of your natural Japanese whetstone, please follow these care guidelines:
1. Keep the Stone Flat
Natural stones wear more slowly than synthetic stones, but regular flattening is still essential for controlled sharpening. Use a diamond lapping plate or a suitable flattening stone to maintain a flat, even surface. Avoid aggressive lapping unless necessary.
2. Use Water Only
Natural Japanese whetstones are designed to be used with water. Lightly wet the surface before use. Some stones benefit from a brief pre-wetting, while others should not be soaked for extended periods. Do not use oil or chemical additives.
3. Slurry Management
Depending on the stone, slurry may develop naturally during use. This is part of the sharpening process and should be managed gently. Avoid excessive pressure or artificial slurry generation unless intentionally desired.
4. Clean After Use
After sharpening, rinse the stone thoroughly with clean water to remove metal particles and residue. Use a soft brush if needed. Do not use soap, detergents, or abrasive cleaners.
5. Dry Slowly and Naturally
Allow the stone to air dry completely in a shaded, well-ventilated area. Avoid direct sunlight, heaters, or rapid temperature changes, as natural stones can crack if dried too quickly.
6. Store with Care
Store the stone in a dry, stable environment. Avoid damp locations and protect the stone from impacts or sudden temperature changes. If stored long-term, ensure the stone is fully dry before placing it in a box or wrapping.
7. Inspect Before Use
Before each use, rinse the surface and ensure it is free from dust, grit, or foreign particles. Any contamination may cause scratches on the blade and compromise sharpening results.
By following these guidelines, your natural whetstone will retain its unique sharpening characteristics and provide consistent, controlled results over time.
Teilen
